Location :
HOME >
PRODUCTS >
Shapes >
Bar >
Square Bar >
C36000 Free Cutting Brass Free Machining Brass
Standards: ASTM B16, SAE J461, SAE J463, SAE 72 AMS 4610, CW603N, DIN 2.0375
C36000 Free Cutting Brass / Free Machining Brass is ideally suited for high speed machining operations with its superior machinability, thread rolling and knurling characteristics. Its machinability rating of 100 is standard against which all other copper alloys are rated. It is easily soldered or brazed and has good resistance to corrosion.
Typical Uses for CDA 360 Free Machining Brass / Free Cutting Brass:
BUILDERS HARDWARE: Lock Bodies, Hardware, Fittings
CONSUMER: Hot Combs (to Straighten Hair)
FASTENERS: Bolts, Nuts, Screws
INDUSTRIAL: Faucet Components, Pneumatic Fittings, Fluid Connectors, Automatic Screw Machine Parts, Unions, Adapters, Screw Machine Products, Gauges, Valve Seats, Valve Trim, Valve Stems, Nozzles, Pinions, Gears
PLUMBING: Plumbers' Brass Goods, Faucet Stems, Faucet Seats, Plumbing Fittings
Sizes Available
HOLLOW BAR. . . . . . . . . . .up to 3" O.D. (with min w/t of 3/16")
SOLID BAR. . . . . . . . . . . . . 3/32" - 16" diameter
HEX BAR. . . . . . . . . . . . . . . 5/32" - 4" hex
RECTAGULAR BAR. . . . . . 1/8" - 2" thick and to 8" wide
SQUARE BAR. . . . . . . . . . .1/8" - 4" squre
PROFILES / SECTIONS. . . made to order
C36000 Alloy Specifications
End Product | Specification |
Bar | AMS 4610, ASTM B16, SAE J461, J463 |
Rod | AMS 4610, ASTM B16, SAE J461, J463 |
Shapes | ASTM B16, SAE J461, J463 |
Valves | MILITARY MIL-V-18436 |
Wire | ASTM B16 |
-
-
-
*
-
-
*
-
+86-18861825505
-
+86-18861825505
-
kate@xxs-specialsteel.com
-
