C65100 finds its broadest use as rod and wire for cold headed and roll threaded bolts, wood screws and lag screws. C65100 wood screws and lag screws have unusually high strength and toughness, freedom from embrittlement, and a high degree of corrosion resistance to all types of water, saline fogs, and a wide variety of other corrosives.

651 Bronze hull and deck fastenings are the standard materials with yacht designers and the majority of builders of stock power boats. The alloy is also used for cable connectors, mast tangs, deck and pilot house hardware and equipment, welded fuel and water tanks for pleasure and commercial crafts. It is also one of the best copper alloys for pole line hardware.

C65100 nails are also widely used in boat construction and for nailing slate, heavy tile, and other materials where strength and corrosion resistance are essential.

Typical Uses for C65100 Low Silicon Bronze "B":

ELECTRICAL: Conduit, Pole Line Hardware, Motor, Rotor Bars

FASTENERS: Bolts, Cable Clamps, Cap Screws, Machine Screws, Nuts, Rivets, U Bolts, Fasteners, Screws

INDUSTRIAL: Oil Refinery Plumbing Tube, Heat Exchanger Tube, Welding Rod, Hydraulic Pressure Lines

MARINE: Hardware

Specifications

End Product	Specification
Bar	ASME SB98, ASTM B98
Bolts	ASTM F468
Nuts	ASTM F467
Pipe	ASTM B315
Plate	ASTM B96
Plate, Clad	ASTM B432
Rod	ASME SB98, ASTM B98
Screws	ASTM F468
Shapes	ASME SB98, ASTM B98
Sheet	ASTM B96
Strip	ASTM B96
Studs	ASTM F468
Tube	ASTM B315
Wire	ASTM B99, B105